Inspector

TECHNICAL FEATURES

LAND SURVEY ACCURACY USING RTK OR PPK

The inspector pack provides accurate coordinates for every picture, using RTK or PPK technology. This results in land survey accurate data without needing ground control points. The module supports GPS, GLONASS and optionally also BEIDOU and GALILEO. It works with all base stations and RTK networks and is robust against GPS jamming.

REAL TIME ANTI-COLLISION

Fly safely near any obstacle using our proprietary ultrasonic sensors. They have a 55° field of view, covering the complete front side of your UAV, and can also detect open structures and cables. Alternatively, a LIDAR based sensor is available for long range detection. Everybody involved in the operation can log in on the ground station to receive real-time situational feedback on their smart devices.

MEASURE DEFECTS IN IMAGES

After the flight, the aerial photographs are calibrated using the logged distances to the infrastructure. In these calibrated images, defects can be measured with mm-level accuracy. Additionally, using the GNSS data, the position of the defects on the infrastructure can be calculated.

INDEPENDENT ADD-ON MODULE

The independent sensor module can be easily attached to almost any UAV without interfering with its electronics. The inspector pack weighs less than 250gr and is designed to have the least impact possible on flight time.

SECURE CONNECTION

The Inspector Pack has a 868mhz connection between the sensor module and the base station, covering more than 400 meters.

PLUG & PLAY

The Inspector Pack has a 2 hour battery independency, covering 6 20 minute drone flights. The energy levels are displayed on the interface. The inspector pack is easy rechargeable through a Micro-USB connection.

PROUDLY USED BY